Collapsible Guardrails & Handrail Systems

An Aesthetically Pleasing Form of Edge Protection

Collapsible guardrails and collapsible handrails are an aesthetically pleasing, collective measure. The folding guardrail mechanism allows the product to fold onto the roof, making it invisible from floor level. When erected, collapsible guardrails eliminate the hazard of falls from height.

This is the preferred method of fall protection should working at height be unavoidable. The system is suitable for multiple users at any time, requiring very basic working at height training, making it the ideal solution for regular and long duration maintenance at roof level.

Collapsible guardrails and collapsible handrails, as well as any fall arrest system used for Work at Height must be inspected and compliance tested once every 12 months.

Collapsible Handrails -
The Key Benefits

Aesthetically pleasing, collective measure – folding down when not in use
Not visible from ground level
Folding collective measure / guards hazard
Suitable for multiple users requiring basic working at height training
Completely freestanding with no need for drilling or penetration
Suitable for frequent access for long durations of time due to low risk level.

Enquire about this product

Beginner’s Guide To BS 13700:2021

fall arrest collapsible handrail solution

Collapsible handrails & guardrails are easy to install & use.
The system is completely freestanding, meaning there is no need for drilling or penetration of the roof membrane – suitable for new and existing roofs. Lightweight material and quick installation make this solution a simple and cost-effective rooftop safety system.
These systems must be inspected by a suitable working at height Specialist Company a minimum of every 12 months.
In line with the working at height regulations Folding Guardrail provides a collective measure making it the preferred system of choice for most fall protection situations by providing a permanent edge protection. The Health and Safety Executive’s hierarchy of control states if working at height cannot be avoided, then the first consideration should be to use collective measures.
Folding Guardrails comply with the following standards:
BS EN 13374:2013 – Class A
HSG-33 Health & Safety in Roof Work
HSE INDG 284 “Working on roofs”
BS6399: Part 2 1995 Wind Code
BS EN ISO 14122-3:2001
Testing/Inspection standards and frequency:BS EN 13374 for Temporary Edge protection systems – minimum of every 12 months by a working at height specialist company
Collapsible Handrails & Guardrails are available in a range of materials and finishes, including the below:
Materials:
Aluminium
Galvanised steel
Stainless steel
Finishes:
Powder coated to any RAL colour
Please note Folding Guardrails offer curved, incline or straight options.
Most systems base plates are fitted with bonded ribbed rubber mats, which can include an EPDM foam infill suitable for use on concrete, asphalt, PVC membrane and felt roof surfaces.
As this system is freestanding there is no need to fix back to the buildings structure, however some roof materials will require protection underneath the feet to maintain guarantees for the roof. This can be checked with the roofing material manufacturer or contractor.
Folding guardrail has a modular design which allows for onsite reconfiguration if needed, making them ideal for retrofitting to older buildings as well as new build constructions.
Folding Guardrails are also known as:
Collapsible guardrail, weighted guardrail, counter-balanced guardrail, edge protection, safety railing.
Folding Guardrails are commonly installed in the following sectors:
Residential
Industrial
Offices
Retail
Hotels / Leisure
Education
Healthcare

Call us about collapsible handrail and guardrail systems today on 0330 113 0870 or fill in the form below and we’ll get back to you within a few hours.

Name

Email

Subject

Message

Best Contact Number

Include Area Code

How did you hear about us?